Skip to Content

Progress

June 26, 2016 • jdonahue

I think I posted pictures of a hood I bought for the Toyota truck. The one I have now is in reasonable condition, but the reason for the replacement is so that I can hand paint a mural on it, in my shop, instead of on the truck. In the pictures below, you can see how helpful the 4 inch angle grinder with wire wheel is.hood_bracehood_brace2My second to the oldest son Sean went to buy a used Diesel motor and transmission. The man said that he could see it run. When asked how much extra he wanted for the whole truck, the seller said $200 more. So my son bought the whole thing, Now he has his own semi. It needs work, but his equipment does more than my economy stuff. For instance, his old crane truck; he used it to remove a pen plotter from the attic for me, and to take down a tree in the front yard.bigTruck-2

Here’s a relevant Bible verse: Proverbs 14:4 says “Where no oxen are, the crib is clean, but much increase is by the strength of the ox.” That was the power equipment of that day. For us, every piece of equipment needs maintenance, and even restoration, but we can do so much work with the right equipment. The Bible has some really interesting things to say, give it a read today.

Some of the other kids helped me detail the crane truck up to the bed. we were in a hurry, and that’s all the further we could get. I’m getting pretty fast at the wheel painting routine these days.crane-1crane_2crane_3crane_4crane_5

Categories: Uncategorized

S.U.D.s, ABF, & more

June 16, 2016 • jdonahue

I had to resort to military sounding abbreviations for this project, considering part of this post is related to the planned designer camo paint scheme my Toyota truck will get. S.U.D.s is: Simulated Utility Devices. I guess that’s better than Simulated Utility Components. Without the intended camo scheme, er, well, maybe the guy’s startin’ to go “around the bend” a bit, but as part of a faux military look, all is well. In fact, you watch, when this is all said and done, an exciting new trend in vehicle graphics might emerge. ABF is just plain ol’ Automotive Body Filler, AKA Bondo.

The S.U.D. starts as a discarded sign, made from what we call expanded PVC. Just like the stuff pipes are made of, but like it says, kind of ‘poofy’. The stuff is really cool to work with. like a dream for this low rise 3D stuff. Cuts easy and fast, sands easy, is sturdy enough to hold up wherever you need it to. The first couple of pictures show it being drawn and cut. Then I sanded the edges to an angle with the belt sander. Next, I drew lots of measured out marks where the screw holes go. They were countersunk. I’m not sure if it needs filler to make it a smooth transition from the body out to the side of the S.U.D. like something embossed in the metal. After all, the thing has a bunch of mounting holes, why would something stamped out need mounting holes? draw_SUDcut_SUDinstl_SUDIntsl_SUD_2 Ah, two of them, in all their glory. These things are totally fake, inspired by my time at the McGee-Tyson air show. As far as what NORMAL people do, like fix bad rust holes, I have that too. Everywhere you see body filler in the pictures below, the metal was completely gone. I made replacement pieces, riveted them in, and fiberglass bondoed over them. Hmmm, Bondo as a verb. American Heritage Dictionary take note. Anyway, what I’m experimenting with isn’t as important as cold fusion, but still pretty cool for what I do. I paint the pieces front and back, including the body part they get attached to. Then I use rivets dipped in thick oil based paint, to line the inside of the 1/8 inch holes I drilled for them. That way, in theory, everything will be sealed up.  toyota_pass_2ToyotaFenderIt’s really coming along, maybe by this weekend there won’t be anymore body holes. Some people say it would have been easier to buy a new bed, but they don’t know how rusted it is underneath. removing bolts and hardware is more time consuming than people realize. Besides, I want the experience

That reminds me, in the last week I’ve also removed a lot of rust from the frame with a needlescaler, put on brand new brake shoes and drums for the rear axle. The truck has good brake pedal now. Oh, one more thing, I raised the rear shackles a notch, it sits a bit higher, and looks oh so good.Toyot_rake

Categories: Uncategorized